ABOUT US
Video Transcript

Hey, my name's Joe, and I'm the owner and founder here at Easy Trim. I started Easy Trim over 10 years ago because I had the same concerns most of you have, which is: how do you streamline the harvesting process without sacrificing quality? What I've learned over the last 10 years is it's not just about building the best equipment in the industry, it's that our clients aren't just customers, they're long-term partners. And as a partner, you look to us to provide you with industry knowledge, experience, proven systems, and logistics for implementing our equipment throughout your facilities. Well, over the years, we've not only built the best equipment in the industry, more importantly, we've pioneered the logistics and the systems for execution. And as your trusted partner, we tailor that execution on-site with you in a way that accommodates your specific needs. So welcome to Easy Trim. There's a lot of great resources on our site. If you have any questions or need help with navigation, don't hesitate to call us, email us, or use the live chat box below. We sincerely thank you for visiting our site.
Video Transcript

If
you're a professional in the cannabis industry and you've been searching for
a machine that gives you the best finished product with the lowest cost and
the most efficient way possible, then easy trim is your solution. They do a
better job than any other machine on the market. We spent years with
different machines, wet, dried, different methods, and by finding this
machine, we have been able to save time, money, labor. And I had a lot of
questions because I wanted to make sure we were optimizing the room. And so
that dialogue turned into this visit, uh, which I think is helping us hone
our skills on how the machine should be used and how to most efficiently get
a value from the assets we have. We've been able to achieve a, just a higher
quality, uh, especially ever since your products have came along. We Have
plenty of people telling us that the hand trim bud looks great here. And
obviously we have to smirk inside knowing that we actually use the satellite.
We're Saving over a pound to ki a day when we're in harvest of those
varieties where it works. The Keith alone pays for all the labor of the
trimming, And you guys have the ability to follow up. You guys do answer your
phones. You guys are consistent. You guys do provide help, especially when you
know we're stuck in a pinch and I need an extra machine. You, you're always
answering the call. You're always coming down. And for us, that carries its
weight in gold. Hmm.
Video Transcript

Is your cost for trimming too high? The staffing, your trim room and employee drama never end. Has every trim machine you've ever tried not worked well enough? Do you have to touch up retrim or hand trim every single butt? What if there was a process that could change all of that? What if you could cut your trimming staff and harvest time in half? What if you only had to touch up or hand trim 25% of your buds? What if there was a trim machine that maintained bud structure and quality for the last 15 years? Easy Trim's primary focus has been developing a harvesting process and equipment that solves your current trim room problems. Working with countless growers throughout the globe has enabled us to carefully identify four missing pieces and critical steps in the post harvesting process. These Four steps are the missing pieces and solution to eliminating touchup, saving small buds, maintaining bud quality, and reducing the trim room staff, and harvest time. You may already be implementing some of these steps, but if you're missing one, your process is leaving money on the table. If any of the following are true, your process and profit have room to grow. You spend too much time and money on trimming. Your machine doesn't trim one pound In less than a minute, your machine is eating your small buds or rounding and cutting the edges. You must touch up and retrim more than 25% of your buds after it comes out of the machine. Allow us to share with you the four missing pieces that we have uncovered and how our equipment and simple step-by-step guide can guarantee you less cost, better quality, and less time. A 15 minute Zoom call is all it takes for us to walk you through everything you need to know about our equipment and our process. We will also uncover the four critical steps that guarantee automated and efficient harvesting without sacrificing quality. Ask yourself if there was a company that created a process that could solve your trimming problems. Offered onsite consulting was built by growers, provided equipment that cost less, produced, better Bud Quality and had a money back guarantee. Would you have anything to lose? Schedule a Zoom. Call today and get back your profit lost on.
Video Transcript

Picture this, your trim room holds the key to your profitability, yet it's barely monitored. Compared to the grow room's, detailed management of lights, nutrients, airflow, and cost. The harsh reality, while profits are generated in the grow room, they bleed away in the trim room. Why the neglect? It's rooted in the outdated belief that grow rooms drive everything. Truth is trim rooms are just as important, equally affecting your bottom line. Resist the urge to throw more bodies or machines at the problem. The smart move. Fix the process. For 16 years, we've pioneered a solution focusing on critical steps that maintain quality, drive down cost, and streamline labor like never before. We are your trim room guys.

The EZ Trim Difference

EZ Trim Harvesting was founded in 2010 in Broomfield, Colorado, by growers who understood firsthand how much labor, time, and profit can be lost during cannabis harvest and post-harvest processing. Today, we design and build commercial cannabis harvesting equipment in Denver for cultivators of all sizes.

Our approach goes beyond building machines. We focus on improving the entire harvest process—from bucking and trimming to sorting, touch-up, drying, curing, and final flower preparation.

Many trim rooms struggle with the same problems: too much labor, inconsistent results, excessive hand touch-up, unreliable equipment, and workflows that become harder to manage as production increases. In our experience, simply adding more people or more equipment rarely fixes the underlying problem.

The biggest gains come from improving the process itself.

That means preparing flower correctly before trimming, controlling dryness, matching equipment settings to the condition of the flower, reducing unnecessary handling, and organizing sorting and touch-up so labor is used where it adds the most value.

EZ Trim equipment and post-harvest methods are designed to work together as a system. Our product lineup includes cannabis bucking equipment, wet and dry trimming systems, flower sorting and grading equipment, precision touch-up tools, drying and curing systems, and cultivation-support products.

Over the years, we have worked with hundreds of growers around the world, from smaller craft operations to large commercial cultivation facilities. That experience has helped us continuously refine both our equipment and the processes surrounding it.

Our goal is straightforward: help growers process flower more efficiently while protecting the quality, structure, and value of the finished product.

A Better Harvest Starts With a Better Process

The best harvesting equipment can only perform as well as the process around it. That is why EZ Trim places so much emphasis on education, preparation, and workflow—not just machinery.

Our Harvest Playbook, product manuals, training videos, and support resources are designed to help cultivators understand not only how to use the equipment, but how each stage of the harvest affects the next.

When the process is right, growers can reduce labor, reduce unnecessary touch-up, improve consistency, preserve flower quality, and build a harvest workflow that scales with their operation.

Resources